Redman's Rifling & Reboring Home Reline gun barrels to their original caliber

189 Nichols Rd.
Omak, WA 98841
(509) 826-5512
Mon - Fri 9:00 to 4:00 Pacific Coast Time

Contact Us

Rebore gun barrels to a larger size
Gun Barrel Liners
Gun Magazine Tubes
Mauser Broomhandle Barrel Restoration
Shipping & Payment Details
Mauser Broomhandle Barrel Restoration
Our work is exclusive to the guns and calibers listed within this website.

Mauser Broomhandle Relining to 7.63
Relining your Broomhandle or Bolo to 7.63 Mauser is an excellent method to restore your bore. You will still retain the original exterior of the bbl. but the bore will be restored like new. I use the finest barrel liner available, made here in our shop from 4140 alloy steel. They are button rifled with a bore that is ultra smooth and uniform, with sharp, distinct rifling. They have 6 lands and grooves like the original bbls. I make my liner with a .308" groove and 1-10" twist. The liner goes all the way through the bbl. and you get a new chamber which is set up with minimum headspace. I use a special retaining compound to secure the liner in place and it is guaranteed never to come out and it will withstand the temps of hot tank blueing. I blend in the liner at the muzzle so you don't see the seam. You will receive the finest reline in the country and I guarantee it!

Cost to reline and chamber to 7.63 Mauser ..................................................................... $225.00
Shipping Instructions: Ship just the barrel extension and the stripped bolt. If you cannot take out the extractor don't worry about it.
Shipping, Handling, and Insurance cost: ................................................................................................................... $20.00

Mauser Broomhandle Rebores (Currently not doing these due to my backlog)
Reboring your 7.63 Mauser Broomhandle to 9mm Luger is an excellent conversion since the action was made to handle the 9mm Luger cartridge as in the "Red Nine" model. No action conversion is required but the barrel must be rebored to 9mm. I have rebored a large quantity of the Broomhandle barrels since 1973 and therifle very good with the methods that I am using. I cut rifle the barrels with 6 grooves, .004" deep per side. I guarantee that you the customer, will reeive a professional rebore, with precision craftsmanship. We do not take shortcuts in your rebore job, so compare quality, not only price when considering a company to do your rebore.

Cost to rebore to 9mm: (Not reboring to 9 mm at this time) ............................................. $300.00
Shipping Instructions:
Ship just the bbl. extension and the stripped bolt.
Shipping cost: ....................................................................................................................$17.00

Please read and sign responsibility waiver for Mauser Broomhandle Rebores.

 

Note: If you can not open the waiver, try downloading Acrobat Reader for free.